Korosten MDF manufacture

MDF Truckload Norms (Eurotrucks)

Product Name
 Тhickness Density
 Dimensions
 Pallet Eurotruck Packaging weight, kg (one pallet)
width, mm
 length, mm
 Number of boards/pcs
 m2 m3 Stack net weight, kg
 Stack gross weight, kg
 Number of pallets, pcs
 m2 m3 Gross weight, kg
мм kg/m3
MDF 6 810 2800 2070 72 417,31 2,50 2028 2182 9 3755,81 22,53 19642,46 154
MDF 8 820 2800 2070 54 312,98 2,50 2053 2208 9 2816,86 22,53 19867,81 154
MDF 10 820 2800 2070 42 243,43 2,43 1996 2151 9 2190,89 21,91 19354,51 154
MDF 12 780 2800 2070 40 231,84 2,78 2170 2304 9 2086,56 25,04 20737,90 134
MDF 16 780 2800 2070 30 173,88 2,78 2170 2304 9 1564,92 25,04 20737,90 134
MDF 18 780 2800 2070 26 150,70 2,71 2116 2250 9 1356,26 24,41 20249,65 134
MDF 19 780 2800 2070 26 150,70 2,86 2233 2368 9 1356,26 25,77 21307,53 134
MDF 22 780 2800 2070 22 127,51 2,81 2188 2322 9 1147,61 25,25 20900,65 134
MDF 25 760 2800 2070 20 115,92 2,90 2202 2337 9 1043,28 26,08 21030,02 134
MDF 28 750 2800 2070 18 104,33 2,92 2191 2325 9 938,95 26,29 20925,69 134
MDF 30 730 2800 2070 16 92,74 2,78 2031 2165 9 834,62 25,04 19485,96 134
MDF 38 730 2800 2070 14 81,14 3,08 2251 2385 9 730,30 27,75 21466,11 134
MDF 40 730 2800 2070 14 81,14 3,25 2369 2504 8 649,15 25,97 20028,75 134
L1 MDF
 10 820 2800 2070 42 243,43 2,43 2016 2150 9 2190,89 21,91 19348,25 134
L1 MDF
 12 780 2800 2070 40 231,84 2,78 2189 2323 9 2086,56 25,04 20904,83 134
L1 MDF
 16 780 2800 2070 30 173,88 2,78 2184 2318 9 1564,92 25,04 20863,09 134
L1 MDF
 18 780 2800 2070 26 150,70 2,71 2128 2262 9 1356,26 24,41 20358,15 134
L1 MDF
 19 780 2800 2070 26 150,70 2,86 2245 2380 9 1356,26 25,77 21416,03 134
L1 MDF
 25 760 2800 2070 20 115,92 2,90 2212 2346 9 1043,28 26,08 21113,48 134
L2 MDF
 16 780 2800 2070 30 173,88 2,78 2198 2332 9 1564,92 25,04 20988,29 134
L2 MDF
 18 780 2800 2070 26 150,70 2,71 2140 2274 9 1356,26 24,41 20466,65 134
L2 MDF
 19 780 2800 2070 26 150,70 2,86 2257 2392 9 1356,26 25,77 21524,53 134

 

Our company has a developed infrastructure - own railways with access to the railway station. Product delivery can be carried out to any place in Ukraine by railway or truck.
 
Packaging and Marking
MDF boards are packed into stacks (fom the bottom – protection board, from the top – cardboard sheet), strapped with tight plastis tape. Every stack is marked with a tag.
 
Packaging Scheme  

1. The stack is put on to the protection board and wooden bars according to the size of the board (2800х2070 mm);
2. The top of the stack is covered with cardboard sheet (2800х2070 mm);
3. The stack is strapped with four rings of plastic tape;
4. Maximum stack weight is 170 kg.

Types of transportation:

  • trucks;
  • box cars (covered waggons).


Recommendations on MDF Stacking and Storing

-  the storehouse should be properly ventilated, relative humidity should be 45-75% under temperature 10-40°C.Wet floor snould be covered with polyethylene film to prevent water penetration into MDF board;
- to cover the stacks from the top and bottom with substrates to avoid weather influence during transportation or long storing;
- to cover edges of the boards to prevent moisture and heat influence;
- to place boards horizontally, while vertically stored to comply with strictly vertical position and stability;
- to stack boards aligned with each other to avoid edge and corners damage;
- to store boards in stacks not higher than 4.5 m and with spacers in between;
- to place the bottom stack on the plain surface on to wooden bars or pallet;  
- to separate stacks with dry wood bars of the same thickness (width and thickness of the bars should be not more than 80 mm; thickness tolerance of the bars used for one stack should be not more than 5 mm;
- to place the bars with intervals of 600 mm, there should be at least three bars for one stack, the distance between the edge bar and the stack edge should not exceed 200 mm;
- all wooden bars in stack should be aligned vertically.
 
 

OUR PARTNERS 

 
#fc3424 #5835a1 #1975f2 #2fc86b #fevec9 #134f10441 #100313115750